Murata Manufacturing Co., Ltd. has introduced the MGJ2T2 series, 2W SIP isolated gate-drive DC-DC converters for high-voltage SiC power applications. The series combines 6kVDC isolation with 2.5pF isolation capacitance and common-mode transient immunity (CMTI) exceeding 200kV/μs. It supports applications including energy storage and distribution, motor drives and EV charging.
Fast switching in SiC-based power converters produces rapid voltage changes that can couple electrical noise across the isolation barrier between the power stage and control circuitry. The series' 2.5pF isolation capacitance limits this coupling, while its CMTI of more than 200kV/μs enables it to tolerate rapid common-mode voltage transitions.

The converters operate from a 24V input and provide +18V/-3V bipolar outputs for SiC MOSFET gate drivers. The positive rail provides the voltage required to turn the power device on, while the negative rail supports reliable turn-off.
Murata uses its proprietary Block-Coil technology, in which separate windings are formed on solid insulating formers. The construction physically separates the primary and secondary circuits while reducing capacitance between them. It provides more than 8mm of creepage and clearance, and the solid insulation barrier provides high partial-discharge tolerance.
The MGJ2T2 series supports reinforced insulation at working voltages up to 800Vrms or basic insulation up to 1600Vrms, and is tested to withstand 6kVDC across the isolation barrier. It is designed to meet IEC 60664-1, which the company says provides further assurance of the insulation system's safety performance.
The same isolation and noise-immunity characteristics are relevant to solid-state transformer (SST) architectures. SSTs use high-frequency power conversion and can divide high input voltages across multiple cascaded switching stages. Each switching element requires an isolated gate-drive power supply, making isolation and noise immunity between the power stages and control circuitry important.
The converters operate over a temperature range of -40°C to +125°C and are supplied in an SIP package. Target applications include ESS and BESS, microgrids, motor drives, industrial automation, EV charging and heat pumps.






