Electronics Engineering Herald                 
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
Processor / MCU / DSP
Memory
Analog
Logic and Interface
PLD / FPGA
Power-supply and Industrial ICs
Automotive ICs
Cellphone ICs
Consumer ICs
Computer ICs
Communication ICs (Data & Analog)
RF / Microwave
Subsystems / Boards
Reference Design
Software / Development kits
Test and Measurement
Discrete
Opto
Passives
Interconnect
Sensors
Batteries
Others

New Products

  Date: 15/05/2014

ESD protection diode for CAN interface

ProTek Devices has introduced a new electrostatic discharge (ESD) protection diode designed for circuit protection in automotive controller area network (CAN) bus lines and other automotive applications. The PESD1CAN is able to provide ESD circuit protection of > 25 kilovolts for a CAN_HI and CAN_LO bus line. It also provides over voltage circuit protection against other electrical fast transients (EFT).

The PESD1CAN has a rated stand-off voltage of 24 volts, minimum breakdown voltage of 25.4 volts, and maximum clamping voltage of 70 volts. The new diode is compatible with various IEC standards that include 61000-4-2 (ESD): air 15kV, contact 8kV; 61000-4-4 (EFT): 40A, 5/50ns; and 61000-4-5 (surge): 3A, 8/20 micro seconds. The PESD1CAN features 200 watts peak pulse power per line for a typical 8/20 micro second wave shape. It also boasts a low clamping voltage, low capacitance and low leakage current of 0.05 microamperes. The PESD1CAN is also RoHS and REACH compliant.

It is provided in a molded JEDEC SOT-23 package with an approximate weight of only eight milligrams. It has lead-free pure-tin plating (annealed) and a solder reflow temperature (pure-tin - Sn, 100) of 260-270 degrees Celsius. The flammability rating is UL 94V-0.

Pricing and Availability
ProTek Devices PESD1CAN ESD circuit protection diode is now available in mass quantities. Pricing starts at around $0.10 per part in minimum quantities of 3,000 units. It's available in 8mm tape and reel, per EIA standard 481.



 
ADVT
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
©2010 Electronics Engineering Herald