Electronics Engineering Herald                 
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
Processor / MCU / DSP
Memory
Analog
Logic and Interface
PLD / FPGA
Power-supply and Industrial ICs
Automotive ICs
Cellphone ICs
Consumer ICs
Computer ICs
Communication ICs (Data & Analog)
RF / Microwave
Subsystems / Boards
Reference Design
Software / Development kits
Test and Measurement
Discrete
Opto
Passives
Interconnect
Sensors
Batteries
Others

New Products

  Date: 11/08/2013

Fast-mode Plus I²C-bus buffer for servers

NXP Semiconductors N.V. has made available of PCA9617A Fast-mode Plus (Fm+) I²C-bus buffer, enabling engineers to design next-generation server systems using new DDR4 technology with the I²C-bus operating at up to 1 MHz, and voltage level translation of 0.8V on the CPU side to 2.5V on the SDRAM module side. The PCA9617A operates up to 1 MHz with normal Fast-mode drive to allow operation on more heavily capacitive loaded buses, but is backward-compatible to Fast-mode and Standard-mode speeds.

The PCA9617A is a CMOS integrated circuit that provides voltage level shifting between 0.8V and 2.5V supply voltages for Fast-mode plus I²C-bus or SMBus applications. While retaining all the operating modes and features of the I²C-bus system during the level shifts, it also permits extension of the I²C-bus by providing bidirectional buffering for both the data (SDA) and the clock (SCL) lines, one bus, split into two sections of 550 pF (max) at 1 MHz. Using the PCA9617A enables the system designer to buffer the load capacitance of the bus, and provide voltage level translation. The SDA and SCL pins are overvoltage tolerant and are high impedance when the PCA9617A is unpowered. Evaluation samples and demo boards are available immediately.

“Our primary server architecture customers asked us to develop an improved version of the PCA9517A that was faster and supported lower voltages for their next-generation architecture. Working closely with them, we released the PCA9617A to allow their engineers to meet the complex specifications of their advanced server architectures,” said Stephen Blozis, international product marketing manager, NXP Semiconductors. “NXP will continue to develop innovative ways in which the I²C-bus can be used in advanced systems and enable engineers involved in the design of complex architectures to reach new performance levels.”

Package: The PCA9617A is available in TSSOP8 (MSOP8) “DP” and smaller leadless HWSON8 “TP” packages.

Availability and price: The PCA9617ADP and PCA9617ATP are both are in volume production priced at $0.54 in 10K quantities. Evaluation samples and demo boards are available immediately.



 
ADVT
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
©2010 Electronics Engineering Herald