electronics engineering Herald                                          
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
Processor / MCU / DSP
Memory
Analog
Logic and Interface
PLD / FPGA
Power-supply and Industrial ICs
Automotive ICs
Cellphone ICs
Consumer ICs
Computer ICs
Communication ICs (Data & Analog)
RF / Microwave
Subsystems / Boards
Reference Design
Software / Development kits
Test and Measurement
Discrete
Opto
Passives
Interconnect
Sensors
Batteries
Others

Date: 21st Jun 2011

Single/dual-channel power distribution switches supporting USB 3.0 specs

Exar Corporation has unveiled the XRP252x series of two single and two dual-channel power distribution switches supporting the latest USB 3.0 and all earlier USB specifications. The XRP2525 and XRP2526 devices are optimized for VBUS power distribution applications with a guaranteed continuous 900mA per channel current capability, controlled rise and fall time and enhanced port protection.

The XRP2527 and XRP2528, with continuous current ratings of 1A per channel accept input voltages as low as 1.8V and are designed to suit for generic power distribution applications. The XRP2527 and XRP2528 also provide enhanced power port protection by an externally programmable current limit providing better than 8% accuracy at full current range.

"With USB 3.0 level of performance becoming the de facto standard in USB peripherals, these new devices open a new and growing market to Exar," said Eric Pittana, director of marketing, Power Product Line. "This is not only driven by the need for higher data transfer rate but also by the increased output power required on these USB ports. The XRP252x series enables end equipment to handle the higher load switching while providing enhanced protection for hubs and peripherals."

Key Product Features

With a capability of up to 1A continuous current per channel, the XRP252x series of power distribution switches features independent port enables, independent 10ms filtered error flag signals, controlled start-up time in hot-plug events, short circuit protection and a precision current limit in the XRP2527 and XRP2528. Additionally, the power protection scheme includes under voltage lockout, reverse output voltage blocking and thermal shutdown. These devices are offered in a single or dual channel configuration and accept a wide input voltage range of 1.75V to 5.5V suitable to operate from industry standard 1.8V, 3.3V and 5V power rails.


Prices, Packages, Availability: The XRP2525 and XRP2526 are available now in volume quantities and offered in a RoHS compliant, "green" halogen free 8-pin SOIC package. Pricing starts respectively at $0.33 and $0.39 for 1K units.

The XRP2527 and XRP2528 are available now in volume quantities and offered in a RoHS compliant, "green" halogen free 8-pin DFN and 10-pin thin DFN packages with pricing starting respectively at $0.39 and $0.54 for 1K units.

For more information visit: http://www.exar.com/


 
Xilinx 7 series FPGA
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
©2010 Electronics Engineering Herald