HomeNewsNews Details
News Details
Date: 24-11-13

Xilinx to showcase solutions for industrial electronics at SPS/IPC Drives 2013

Xilinx to showcase its FPGA chip Solutions for Smarter Factories and Smarter Vision at SPS/IPC Drives 2013, particularly the Zynq All Programmable SoCs for designing Programmable Logic Controller, Motor Control, Industrial Networking, Machine Vision and Functional Safety applications. Learn more about Xilinx's All Programmable Solutions for Smarter Factories and Smarter Vision by visiting Booth #6-111 at SPS/IPC Drives, November 26-28, at the Nuremburg Exhibition Hall in Nuremburg, Germany.

Xilinx Demonstrations at Booth #6-111
Smart Compact Vision System
This demonstration compares two high speed Optical Character Recognition (OCR) systems performing real-time silicon device code recognition utilizing the Zynq-7000 All Programmable SoC and the HALCON machine vision software from MVTec. The hardware acceleration system processes the video stream at 60fps while the software-only implementation runs at a slower rate. The acceleration of hardware was implemented using VisualApplets from Silicon Software that reduces development time and design complexity.
High Bandwidth Machine Vision
This demonstration showcases two video streams transferred with different high-speed protocols for machine vision cameras and frame grabbers that are enabled by the Xilinx 7 Series FPGA and SoC devices. Sensor to Image supports GigEVision 2.0 and CoaXPress IPs and software stacks that enables video transfer rates over 10Gb per second.
Motor Control Design Methodology
This demonstration unveils a motor control design flow that supports design and simulation of high-level models within The Mathworks MATLAB environment. The HDL Coder and Embedded Coder tools automatically generate C/HDL code for the Zynq All Programmable SoCs which shorten design cycles and accelerate time to market.
EtherCAT Fast Drive
This demonstration showcases an integrated drive system with multi-axis motor control and EtherCAT networking. A single chip Zynq-7000 All Programmable SoC solution implemented by QDesys delivers high performance, low torque ripple motor drive with less than 62.5 microsecond cycle time.
Programmable Logic Controller (PLC)
This demonstration highlights the Zynq-7000 All Programmable SoC configured as an embedded PLC that manages devices through Ethernet Powerlink. The embedded runtime software is provided by KWSoftware and is programmed using the IEC61131-3 compliant language.
Safe System
This demonstration showcases a highly dependable system with PROFINET IRT on the Zynq-7000 All Programmable SoC for high performance automation applications. While the ARM Cortex-A9 executes the communication stack, two microprocessor soft cores run in lock-step mode to provide on-chip redundancy in a functional safety system.

0 Comments
Default user
Related News