Electronics Engineering Herald                 
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
Processor / MCU / DSP
Memory
Analog
Logic and Interface
PLD / FPGA
Power-supply and Industrial ICs
Automotive ICs
Cellphone ICs
Consumer ICs
Computer ICs
Communication ICs (Data & Analog)
RF / Microwave
Subsystems / Boards
Reference Design
Software / Development kits
Test and Measurement
Discrete
Opto
Passives
Interconnect
Sensors
Batteries
Others

New Products

  Date: 29/11/2015

CAN FD and programmability featured Leaf CAN interfaces

Swedish CAN hardware specialist Kvaser AB added two new products to its Leaf CAN to USB interface family, the Kvaser Leaf Pro HS v2 and Kvaser Leaf Pro HS v2 OBDII.

Kvaser’s Leaf interface family is a tool for connecting any CAN network to a PC or mobile computer in applications such as automotive, mining, marine, military, oil and gas exploration, industrial and heavy machinery.

The new Kvaser Leaf Pro HS v2 transmits the 64 data bytes of a CAN FD frame at bit rates up to 8 Mbit/s, in addition to standard CAN frames of 8 bytes.

With a maximum message rate of 20000 messages per second, each time-stamped with a one microsecond accuracy, this is a highly advanced, portable real-time CAN to USB interface that can be customised using Kvaser’s t programming language, says Kvaser. Kvaser suggests users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols.

Commenting on the announcement, Lars-Berno Fredriksson, president of Kvaser AB, said: “Our best-selling interface just got better. CAN FD-capability and programmability make the Kvaser Leaf Pro HS v2 and Kvaser Leaf Pro HS v2 OBDII our most capable Leafs yet!”

Featuring Galvanic isolation, 107cm long USB lead, and either a standard 9-pin DSUB or a 16-pin OBDII connector, the Kvaser Leaf Pro HS v2 and Kvaser Leaf Pro HS v2 OBDII suit a wide range of environments, from ECU development and test to in-the-field service situations.
The Leaf Pro HS v2 and Kvaser Leaf Pro HS v2 OBDII are available now with free software, free software updates and free support.
For more info visit www.kvaser.com/products/kvaser-leaf-pro-hs-v2/




 
ADVT
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
©2010 Electronics Engineering Herald