Electronics Engineering Herald                 
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
Processor / MCU / DSP
Memory
Analog
Logic and Interface
PLD / FPGA
Power-supply and Industrial ICs
Automotive ICs
Cellphone ICs
Consumer ICs
Computer ICs
Communication ICs (Data & Analog)
RF / Microwave
Subsystems / Boards
Reference Design
Software / Development kits
Test and Measurement
Discrete
Opto
Passives
Interconnect
Sensors
Batteries
Others

New Products

  Date: 30/04/2014

Clip FlatPower Packaged 10 Amps schottky rectifiers

NXP Semiconductors N.V. has introduced the first 10 A, 45 V Schottky barrier rectifiers PMEG45U10EPD and PMEG45A10EPD in the new CFP15 (SOT1289) package. This new Clip FlatPower Package (designed for IF max up to 15 A) with physical dimensions of 4.3 mm x 5.8 mm and a height of only 0.8 mm, making it thinner than the pin-compatible PowerDI5 and SMPC (TO-277A) rectifier package available on the market today, as per NXP. NXP suggests this small form factor combined with a high electrical performance make PMEG45U10EPD and PMEG45A10EPD the optimal choice for next generation smartphone and tablet power adapters. Applications include SMPS / DC-to-DC converters, polarity protection and high-speed switching.

These Schottky rectifiers come with forward voltage drop of 350 mV at 10 A forward current and 85°C junction temperature and a guaranteed breakdown voltage of more than 45 V, the new devices meet the safety demands of up to 15 W chargers with 5 V output voltage. PMEG45A10EPD is optimized for low VF and low IR and boosts a capacitance of only 900pF (typ.) at 1 V. PMEG45U10EPD is optimized for lowest VF and has a capacitance rating of 1200pF (typ.) at 1 V.

The CFP15 package design has a solid clip and exposed heat sink to help reduce the package’s thermal resistance and optimise the transfer of heat into the ambient environment; allowing for smaller and thinner charger designs. The front sides of the package leads are also tin-plated and 100% solderable, enabling optical solder inspection.

“With our new CFP15, NXP has developed a package that further enriches the market for compact and high power Schottky rectifiers by offering an even thinner alternative.” said Wolfgang Bindke, product manager diodes, NXP Semiconductors. “Over the course of 2014 and 2015 we will extend the portfolio with further Schottky rectifiers up to 60 V and 15 A . Manufacturers of power adapters as well as automotive suppliers are keen to see smaller and more efficient modules in the coming years.”

The new 45 V, 10 A Schottky rectifiers PMEG45U10EPD and PMEG45A10EPD in CFP15 are available immediately in high-volume production.

For more info visit: www.nxp.com



 
ADVT
Home | News | New Products | India Specific | Design Guide | Sourcing database | Student Section | About us | Contact us | What's New
©2010 Electronics Engineering Herald