Voltage protection device family for data communication lines

Littelfuse announced an expansion to the SP03-x overvoltage suppression device series, designed for low distortion overvoltage protection of data lines and interface circuits in Ethernet, T3/E3, DS3, ADSL2+, and VDSL2+ systems.

1. Offers a multi-element design that lowers capacitive losses compared to TVS devices alone.
2. The SP03-x series combine a transient voltage suppression device with a diode rectifier bridge to      provide both longitudinal (common mode) and differential protection in one package, suppressing      both positive and negative voltage surges.

3. This design results in low insertion loss and a log-linear capacitive loading characteristic with      respect to the signal voltage across the device. The result is reduced inter-modulation.
4. A low clamping voltage for both common mode and differential surge conditions means there is less     stress on the protected equipment, and more robust equipment equates to longer life.
5. The SP03-3.3BTG is RoHS compliant,
6. Input capacitance at 1MHz is typically 16pF (25pF max.), resulting in low attenuation and better line      balance for high-speed data.
7. The SP03-3.3BTG has a reverse standoff voltage of 3.3V, and clamps surges to 11.5V under 50A      surge current conditions (15V at 100A surge).
8. Peak surge rating of 150A or 3300W (8/20µs waveform)
9. The SP03-3.3BTG meets the requirements of the following standards:

1. Telcordia GR1089 (Intra-Building): 100A, 2/10µs waveform
2. ITU K.20: Ipp = 40A, 5/310µs waveform
3. IEC 61000-4-2 (ESD): 30kV (air), 30kV (contact)
4. IEC 61000-4-5 (Lightning): 100A, 8/20µs waveform

Availability:
1. OEM samples are available from stock.
2. Tape and reel orders typically ship 8-10 weeks ARO, and come in reel pack quantities of 2500

Package: The SP03-3.3BTG is available in SO-8 (MS 012) Surface Mount Packaging

For More Information visit the Littelfuse website at www.littelfuse.com